Striping Kit for the Tamiya Globeliner 1/14 RC Truck. This decal kit can be installed fully flat to the body because the holes for the plastic rivets and bodylines are precut in the decal. Choose your favourite colour for this decal kit.
Kit contains 2 side decals and one rear decal.
Kit contains 2 side decals and one rear decal. (Rear decal not shown on picture).
Striping Kit for the Tamiya Globeliner 1/14 RC Truck. This decal kit can be installed fully flat to the body because the holes for the plastic rivets are precut in the decal. Choose your favourite colour for this decal kit.
If you want a decal kit that goes from one colour to a completely different colour please contact us so we can make a custom set.
option 1: Choose the base colour for the stripes. For example shown is the colour brown.
option 2 : Choose the colour for the outside line, shown is the colour gold. * Note that the gold is printed over the base colour and will have a different shade on each different base colour.
option 1: Choose the colour for the light and dark fade. For example shown is the colour green. If you enter green you will get a light and dark colour in green.
option 2 : Choose the colour for the outside line, shown is the colour black.
This picture of the different colours is a computer render. Colours are only for impression and can be different on the decal.
Rear wall for the Tamiya Scania, with lightingChoose your colour combination.LED's work with voltage from 7,2 to 12 volts.Speakers are for display purpose only and do not work.
Choose your desired colours.Shown colours:A BlackB WitC Wit
Must be glued in place or with double sided sticky tape. This is not included with the panels.
OLDSKOOL text is printed on both sides of the flap.
Shown base curtain colour is taupe, contrast line brown, flap colour beige, text brown
INTERCOOLER text is printed on both sides of the flap.
set of 2 side poles for the front bumper of the Grand Hauler.
You need to drill 2 holes of 3.2 mm in the bumper.
Note: The poles have a slight angle when they are mounted because the inside of the bumper has a slight slope. When the poles are installed they are slightly hanging forward. You can adjust this by bending the thread a bit. (DO NOT BEND THE THREAD WHEN THEY ARE ON THE BUMPER).
Table for on top of the Instrument Panel of the Tamiya Scania Dashboard LHD.
Choose your paint colour, and colour for the Antiskid on top. For the antiskid you can choose from Ribbed, Alcantara Look or Wood.
Table for on top of the Instrument Panel of the Tamiya Scania Dashboard RHD.
This table is made to fit a dashboard that is a perfect mirrorred example of the original dashboard. If your dashboard is not a perfect mirror of the original dash then fitment problems are at your own risk.
Table for on top of the Tamiya Scania Dashboard. Can be used on RHD and LHD Dashboard.
Set of 2 curtains for the Tamiya Volvo FH16.
Handmade "Platinum Pack" interior kit for Tamiya Scania with diamond stitching.Made of artificial Leather, Suede look and Alcantara look material.
From € 620,70 for € 575,-
Kit contains:1 - Dashboard with lighting, key, keychain and switch (A,B,C,D,E)2 - Floormats (3 pieces) (F,G)3- Seats and seatbelts (H,I,J,K)4- Curtains, 1 Front, 2 Side (L,M,N)5- 2 Tweeters for A Pillar (O)6- Roof Top and Roof Side Panels Left and Right (P,Q)7- Side Walls Rear (R,S)8- Panel above Windshield (T,U)9- Doorpanels Left and Right, Door surround top Left and Right (V,W,X,Y)10- Floor Piece Front of Cabin (Z,a)11- Engine Cover (b,c,d)12- Rear Wall (e,f,g,h,i,j,k)13- Subwoofer Box with dual speakers and bass reflex ports (show only, not functioning) (l,m)14- Rised floor (rear of cab) (n,o)15- Rear Table (p)16- Rear Side Seats (q,r)17- Rear Cabinets (s,t,u,v)18- Laptop (w)19- CB Radio (x)
Fully Hand built CB Radio, choose the lighting colour you want. Use only on 7 to 12 Volt.
Version 2 of the CB Radio has got a few upgrades, more realistic knobs, raised 3D displays, speaker grill on the bottom of the radio, grill on the microphone, 3D Up and Down buttons on the radio and the microphone, grooves on the side of the radio, SVL logo on top and grooves on the cb radio knob.
Resistor is allready installed in the wiring, LED works with 7 to 12 volt.
We do not offer any support for installation of this item. We expect that you know how to hook up one positive and one negative wire to your power supply.
Our CB Radio has a very high level of detail. There are even ribs on the knobs, and metal selectors. If you do not know the scale and look at the picture you would think that it is a real CB Radio. This CB Radio takes your interior to the next level
The microphone has a lot of detail on it too. On top there are up and down buttons.
