OLDSKOOL text is printed on both sides of the flap.
Shown base curtain colour is taupe, contrast line brown, flap colour beige, text brown
diameter: 3,5 mm
this set contains 3 decals
Set of 2 side curtains.Choose your colour.
Must be glued in place.
Hyper realistic Laptop in scale 1/14.
Choose the colour you want for the lighting.
Resistor is allready installed in the wiring, LED works with 7 to 12 volt.
We do not offer any support for installation of this item. We expect that you know how to hook up one positive and one negative wire to your power supply.
Detailed safety jacket in orange or yellow. Has reflective stripes like a real jacket.
Choose your Base colour (base colour shown is grey).Choose your Stripe colour (stripe colour shown is black).
One set contains a left and one right mat.
One set of two seat belts.To use these seats belts it is necessary to open the slot on top of the seat to accept the belt. You can choose to make another slot on the bottom of the seat or glue the belt underneath the seat.
The belt has a hyper realistic buckle in mirror chrome and black.
Choose from 21 colours.
Metal Gear Shifter
With Hi-Lo selector and shift pattern on the knob.
easy installation: fit optional round decal on the floor, this decal has a hole that marks where to drill the 3 mm hole. Drill the hole, put the thread through the hole and tighten nut.
This picture shows the optional round decal for the floor. Can be used on a flat surface, but not in combination with a suede or leather floor cover.
Floor part and seats not included.
Fully Hand built CB Radio, choose the lighting colour you want. Use only on 7 to 12 Volt.
Version 2 of the CB Radio has got a few upgrades, more realistic knobs, raised 3D displays, speaker grill on the bottom of the radio, grill on the microphone, 3D Up and Down buttons on the radio and the microphone, grooves on the side of the radio, SVL logo on top and grooves on the cb radio knob.
Our CB Radio has a very high level of detail. There are even ribs on the knobs, and metal selectors. If you do not know the scale and look at the picture you would think that it is a real CB Radio. This CB Radio takes your interior to the next level
The microphone has a lot of detail on it too. On top there are up and down buttons.
made of Lexancolours: green and white
size 5 x 8 mm
comes with installed green cord, long enough to cut to your needed length. After cutting to your length make a knot and cut excess material.
Steering Column part is not included. You are only buying ignition switch, key and keychain. You can choose the colour of the ring of the ignition switch. Choose from black, Gold or Silver. Drill hole to to accept the ignition switch and glue ring and key in place.
Decoration part only, it is not a functioning ignition switch.
Specify your desired colour combo. We can make anything you want. If you have a colour that you are not certain of if we can make it please contact us.
Yellow outside colour, dark grey inside.
Red outside colour, light sand inside.